Algae Eliminator
Most pool algicides prevent algae. Algae Eliminator has been formulated to destroy existing green, black and
mustard algae.
To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools and a pH level of between 7.2 and 7.6.
Instructions for Use
Test to check the chemical balance.
With filter on, brush walls and floor, then shock with chlorine and wait 24 hours.
To effectively remove algae from your pool, add around the water inlets:
500ml per 10,000 litres (2200 gallons)
1 litre per 20,000 litres (4400 gallons)
2 litres per 40,000 litres (8800 gallons)
4 litres per 80,000 litres (17,600 gallons)
ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS NEVER MIX CHEMICALS
After application use a suitable flocculant to aid removal of dead algae.
Safety Information
CONTAINS ALKYL DIMETHYL BENZYL AMMONIUM CHLORIDE & ORGANO COPPER
EC269-919-4
UN3267
DANGER
Causes skin irritation. Causes serious eye damage. Toxic to aquatic life with long lasting effects. Wash with water thoroughly after handling. Do not get in eyes, on skin, or on clothing.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid release into the environment.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do.Continue rinsing.
If skin irritation occurs: get medical advice/attention.
Immediately call a POISON CENTRE or doctor/physician.
Store locked up. Dispose of contents/container to authorised waste disposal contractor.
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.