Winter Long Life Algicide (copper free)
A copper free long life algicide to keep your pool free from algae for up to 6 months.
To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools
and a pH level of between 7.2 and 7.6.
Instructions for Use
- Test to check the chemical balance.
- Shock dose with chlorine and allow time for the chlorine to disperse, then add:
1 litre per 12,000 litres (2650 gallons)
3 litres per 36,000 litres (7900 gallons)
5 litres per 60,000 litres (13,200 gallons)
- Fill a clean plastic bucket with water, add the required dose of long life algicide and mix well.
- Add the solution to the pool near the inlet with the pump running and allow the chemicals to circulate.
ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS
NEVER MIX CHEMICALS
CONTAINS DIPHOSPHONIC ACID
Causes skin irritation. Causes serious eye damage
Toxic to aquatic life with long lasting effects
Keep out of reach of children
Avoid release to the environment.
Do not get in eyes, on skin, or on clothing.
Wash with soap and water thoroughly after handling.
Wear protective gloves/protective clothing eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and easy to do so. Continue rinsing.
If skin irritation occurs: Get medical advice/attention