Total Alkalinity Increaser
To prevent wide swings in the pH level of pool or spa water, ensuring bather comfort and avoiding long term damage to equipment. To ensure safe use of your pool or spa, maintain a total alkalinity of between 80 and 120 ppm, a free chlorine level of between 1-3 ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6.
Available Quantity: – 25kg, 5kg, 1kg
Instructions for Use
- Test to check the chemical balance.
- To increase the total alkalinity by 10ppm or mg/litre add
20 grams per 1000 litres (220 gallons)
100 grams per 5000 litres (1100 gallons)
200 grams per 10,000 litres (2200 gallons)
1.2kg per 60,000 litres (13,200 gallons) - Fill a clean plastic bucket with water, add the required dose of TA increaser and mix well.
- Add the solution to your pool or spa near the water in with the pump running and allow the chemicals to circulate
- Allow the chemicals to circulate for 2-3 hours then retest and repeat as necessary.
SAFETY INFORMATION
ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS
NEVER MIX CHEMICALS
CONTAINS SODIUM BICARBONATE
EC205-633-8
WARNING
Causes serious eye irritation.
Avoid breathing dust/fume/gas/mist/vapours/spray.
IF ON SKIN: Wash with plenty of soap and water.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
Store in a well-ventilated place. Keep container tightly closed
Keep out of reach of children.
If medical advice is needed, have product container or label at hand.
