Stabilised Chlorine Granules
Chlorine granules with built in stabiliser, a premium sanitiser for swimming pool and spa water.
To ensure use use of your pool or spa, maintain a free chlorine lever of between 1-3ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6
Available Quantity: – 25kg, 5kg, 2kg, 1kg
INSTRUCTIONS FOR USE
- Test to check the chemical balance.
- To increase your chlorine level by 1ppm or mg/litre add:
2 grams per 1000 litres (220 gallons)
10 grams per 5000 litres (1100 gallons)
20 grams per 10,000 litres (2200 gallons)
120 grams per 60,000 litres (13.200 gallons) - Fill a clean plastic bucket with water, add the required dose of stabilised chlorine granules to a maximum of 100 grams per 10 litres of water and mix well.
- Add the solution to your pool or spa near the water inlet with pump running.
- Allow the chemicals to circulate for 2-3 hours then retest and repeat as necessary
SAFETY INFORMATION
ALWAYS ADD CHEMICALS TO WATER AND NOT WATER TO CHEMICALS.
NEVER MIX CHEMICALS.
CONTAINS SODIUM DICHLOROISOCYANURATE
Stabilised Chlorine Granules
EC220-767-7
UN3077
CONTAINS SODIUM DICHLOROISOCYANURATE
Harmful if swallowed. Causes serious eye irritation.
May cause respiratory irritation.
Very toxic to aquatic life with long lasting effects.
Do not breathe dust. Keep away from acids.
Wear protective gloves.
Avoid release to the environment.
Do not eat, drink or smoke when using this product.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Warning! Do not use together with other products.
May release dangerous gases (chlorine).
Contact with acids liberates toxic gas.
Keep out of reach of children.
If medical advice is needed, have product container or label
at hand.
