Spa Jolly Gel

£14.17

Spa Jolly Gel

Spa Jolly Gel

HOW TO USE JOLLY GEL – SPA

Every week rinse the cartridge thoroughly to remove collected debris. Followed every two months by a more involved process to remove oils brought into the water which can impregnate the filter cartridge.

Therefore soak the entire cartridge overnight in hot water, NOT boiling water, using a recognised cartridge cleaner. Once done spend the appropriate amount of time rinsing the cartridge to remove any contaminates left which can cause foaming

Important

Old or unclean cartridges will restrict the water flow resulting in the filter plant switching off.

Spa water should be replaced within 90 days. Sooner if it is an actively used spa.

Before installing a dispenser in the cartridge area or skimmer basket.

Check to ensure hygienic water conditions are correct by following the standards below:
PH – 7.0 to 7.6
Alkalinity – 80 to 120 mg/l
Chlorine – 2.5 to 4.5 mg/l
If you are using Bromine – 4.0 to 6.00 mg/l
Use an appropriate test kit.