pH Reducer

£9.46£46.00

To prevent or cure the problems caused by high pH, cloudy water, stinging eyes, ineffective chlorination, clogging of filters and scaling of pool structure. To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6.

Available Quantity: – 25kg, 7kg

Available Quantity: – 1kg, 7kg, 25kg

1kg is ideal for spa’s and hot tubs

7kg is ideal for domestic swimming pools

25kg is ideal for larger pools

SKU: N/A Categories: ,

pH Reducer

To prevent or cure the problems caused by high pH, cloudy water, stinging eyes, ineffective chlorination, clogging of filters and scaling of pool structure. To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6.

Available Quantity: – 25kg, 7kg

Instructions for Use

  1. Test to check the chemical balance.
  2. To reduce the pH add:
    50 grams per 5000 litres (1100 gallons)
    10 grams per 1000 litres (220 gallons)
    100 grams per 10,000 litres (2200 gallons)
    600 grams per 60,000 litres (13,200 gallons)
  3. Fill a clean plastic bucket with water, add the required dose of pH reducer and mix well.
  4. Add the solution to your pool or spa near the water inlet with pump running.
  5. Allow the chemicals to circulate for 2-3 hours then retest and repeat as necessary.

SAFETY INFORMATION

ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS

NEVER MIX CHEMICALS

CONTAINS SODIUM HYDROGEN SULPHATE

EC 231-665-7

DANGER

Causes serious eye damage
Wear protective gloves/protective clothing/eye protection face protection
IF IN EYES: Rinse cautiously with water for several minutes Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor/physician
Keep out of reach of children
I medical advice is needed, have product container or label at hand

DimensionsN/A
Quantity

1kg, 7kg, 25kg