To prevent or cure the problems caused by low pH, such as ineffective chlorination and scaling of pool structure. To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6
Available Quantity: – 25kg, 5kg, 1kg
Instructions for Use
- Test to check the chemical balance.
- To increase the pH add:
50 grams per 5000 litres (1100 gallons)
10 grams per 1000 litres (220 gallons)
100 grams per 10,000 litres (2200 gallons)
600 grams per 60,000 litres (13,200 gallons)
- Fill a clean plastic bucket with water, add the required dose of pH increaser and mix well.
- Add the solution to your pool or spa near the waterInlet with pump running.
- Allow the chemicals to circulate for 2-3 hours then retest and repeat as necessary.
ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS
NEVER MIX CHEMICALS
CONTAINS SODIUM CARBONATE
Causes serious eye irritation
If medical advice is needed, have product container or label at hand
Keep out of reach of children
Do not breathe dust
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.