Granular flocculant assists with the removal of small suspended particles, algae and calcium carbonate,
helping to achieve a clear and sparkling pool
To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6
Available Quantity: – 25kg, 5kg, 2kg
Instructions for Use
- Test to check the chemical balance.
20 grams per 1000 litres (220 gallons)
100 grams per 5000 litres (1100 gallons)
200 grams per 10,000 litres (2200 gallons)
1.2kg per 60,000 litres (13,220 gallons)
- Fill a clean plastic bucket with water, add the required dose of granular floc and mix well
- The circulation pump should be run continuously for at least 4 hours then leave overnight to allow suspended matter to settle
- Vacuum the pool to remove settled matter and backwash the pool filter
ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS
NEVER MIX CHEMICALS
CONTAINS ALUMINIUM SULPHATE
Causes serious eye damage.
Wear protective gloves/ protective clothing/eye protection/face protection
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing
If eye irritation persists. Get medical advice/attention.
Immediately call a POISON CENTER or doctor/ physician.
Keep out of reach of children
If medical advice is needed, have product container or label at hand