Chlorine Stabiliser

£26.26£189.00

Use to protect against the rapid loss of chlorine to sunlight.

To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3ppm for pools or 3-5ppm for spas and a pH level of between 7.2 and 7.6

Available Quantity: – 25kg, 5kg, 2kg

SKU: N/A Category:

Chlorine Stabiliser

Use to protect against the rapid loss of chlorine to sunlight.

To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3ppm for pools or 3-5ppm for spas and a pH level of between 7.2 and 7.6

Available Quantity: – 25kg, 5kg, 2kg

Instructions for Use

  1. Test to check the chemical balance.
  2. Use at the start of the season or when pool is refilled, add:
    30 grams per 1000 litres (220 gallons)
    150 grams per 5000 litres (1100 gallons)
    300 grams per 10,000 litres (2200 gallons)
    1.8kg per 60,000 litres (13,220 gallons)
  3. Fill a clean plastic bucket with water, add the required dose of chlorine stabiliser and mix well.
  4. Add the solution to the pool near the water inlet with the pump running and allow the chemicals to circulate.

SAFETY INFORMATION

ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS

NEVER MIX CHEMICALS

CONTAINS CYANURIC ACID

WARNING

Causes serious eye irritation.
Wash hands thoroughly after handling.
Wear protective gloves/protective clothing eye protection/face protection as needed.
IF IN EYES: Rinse cautiously with water for several minutes Remove contact lenses if present and easy to do.Continue rinsing.
If eye irritation persists: Get medical advice/attention
Keep out of reach of children at hand.
If medical advice is needed, have product container or label

DimensionsN/A
Quantity

2kg, 5kg, 25kg