Calcium Stain Remover

£18.90

Calcium Scale Remover is designed to reduce and soften unwanted scale on both pool interiors and Salt Chlorinator Cells

SKU: C200059 Category:

Calcium Scale Remover

Calcium Scale Remover is designed to reduce and soften unwanted scale on both pool interiors and Salt Chlorinator Cells

To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6.

Instructions for Use

  1. For best results always dose Calcium Scale Remover during spring open up.
  2. From the table below calculate the dose rate required.
  3. Ensuring that the pump and filter are running as normal, mix the calculated dose in a clean bucket with water and evenly distribute around the pool.
  4. Filter as normal.

Dose Rates:

Pool Volume 50,000 litres – 500ml initial dose – monthly dose 100m/
Pool Volume 25,000 litres – 250ml initial dose – monthly dose 50ml
Pool Volume 75,000 litres – 750ml initial dose – monthly dose 150m/

Please note:

This product should not be dosed via the skimmer!

For best results Calcium Scale Remover should be dosed throughout the season in line with the above dose rate table.

To remove scale discolouration on waterline tiles, raise the water level above the waterline level and maintain for at least 3 weeks.

SAFETY INFORMATION

ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS

NEVER MIX CHEMICALS

Contains Silicic Acid, Sodium Salt, Sodium Hydroxide

DANGER

Causes skin irritation.
Causes serious eye irritation.
Avoid breathing mist/vapours/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue Rinsing.
If skin irritation occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.

UFI Code: NG20-JONJ-MOOX-KA4M

Dimensions9 × 9 × 23 cm