A concentrated weekly algicide to keep your pool free from algae.
To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools and a pH level of between 7.2 and 7.6.
Instructions for Use
- Test to check the chemical balance.
- Use an initial dose of 20ml per 10,000 litres of pool water, then weekly add: 6ml per 10,000 litres (2200 gallons) 36ml per 60,000 litres (13,200 gallons)
- Fill a clean plastic bucket with water, add the required dose of weekly algicide and mix well.
- Add the solution to the pool near the inlet with the pump running and allow the chemicals to circulate.
ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS
NEVER MIX CHEMICALS
CONTAINS DIPHOSPHONIC ACID
Causes skin irritation.
Causes serious eye damage.
Toxic to aquatic life with long lasting effects.
Keep out of reach of children.
Avoid release to the environment.
Do not get in eyes, on skin, or on clothing.
Wash with soap and water thoroughly after handling.
Wear protective gloves/protective clothing/ eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and
easy to do so. Continue rinsing.
If skin irritation occurs: Get medical advice/attention.